Ultra-Flex Moulding
General Information
PRODUCT STAINING PROFILES
TEMPERATURE NAILING GLUING
CUTTING GUARANTEE  
 
PRODUCT DESCRIPTION:
ULTIMATE FLEX® is a syntactic polyurethane compound with a cellular composition structure similar to wood and may be handled the same as wood. ULTIMATE FLEX is one-half the weight of other flexible mouldings, yet retains the necessary strength and durability, and saves on freight costs. ULTIMATE FLEX is pre-primed for superior paint and stain adhesion. ULTIMATE FLEX is sanded on the back surface to correct thickness, creating a better match to the wood moulding. This gives a professionally installed look and provides superior glue adhesion. ULTIMATE FLEX has an excellent memory. After laying on a flat surface for a short period of time, depending on temperature, it will return to the shape in which it was originally moulded, allowing for ease of installation.<see Staining Instructions>
STAINING:
ULTIMATE FLEX is supplied in paint and stain grade. The wood grain patterns allow ULTIMATE FLEX to be finished to match various hardwood mouldings.
PROFILES:
Ultra-Flex has over 5,000 profiles available. Custom patterns are also available. <see custom runs>
TEMPERATURE:
All flexible mouldings will stiffen at temperatures below 60°F, but ULTIMATE FLEX may still be nailed without pre-drilling. When moulding is received at the job site, it should be laid on a flat surface. At low temperatures, a warm area or sunny location will help moulding resume the shape in which it was originally molded.
NAILING:
Our product may be nailed with a nail gun without pre-drilling, even at low temperatures.
GLUING:
Using a quality adhesive before nailing is required. Any adhesive that will bond to wood will bond to ULTIMATE FLEX. At the factory, we sand the back of each part to give a better bonding surface. Other manufactures produce unsanded resin mouldings with irregular smooth surfaces that are not always receptive to adhesive and can cause failures.
CUTTING:
Because of ULTIMATE FLEX’s cellular composition, it can be cut or mitered with conventional wood working tools. ULTRA-FLEX has also developed a machinable formulation. When a few feet of straight custom moulding is required, this material may be run through a shaper or moulding machine along with the wood. When ordering material for this purpose you must specify that you want the machinable formula.
CAUTION:
The guidelines above are only for ULTIMATE FLEX. There are other less sophisticated products, such as polyester-based flexible mouldings on the market that cannot and will not perform up to the standards set by ULTRA-FLEX.
Ultra-Flex introduced its new polyurethane formula, ULTIMATE FLEX, over 5 years ago and it has proven to be the superior product in the marketplace without increasing its price. We have found that polyester products can’t compare to the quality and performance of ULTIMATE FLEX.
GUARANTEE:
ULTRA-FLEX MOULDING guarantees all products to be free of defects in material and workmanship. Should the product fail when properly installed, ULTRA-FLEX MOULDING will replace the defective merchandise at no cost to the customer. However, ULTRA-FLEX will not accept any responsibility if the pieces were ordered incorrectly or if improperly installed. In any and all cases, the liability of ULTRA-FLEX shall never exceed the value of the merchandise purchased.
 
ULTRA-FLEX MOULDING is designed to take the pain out of those labor intensive curved surfaces and costly radius top openings.
ULTRA-FLEX MOULDING may be installed by any qualified tradesman. It requires no special equipment or materials. The moulding may be handled the same as wood, with the added benefit of enough flexibility to accommodate the installer’s requirements.

 

 

 

ULTRA-FLEX’s syntactic polyurethane formula is nearly 1/2 the weight of other flexible mouldings. This lightweight flexible crown moulding is easier to work with than anything else on the market.

Over 5,000 Profiles Available
Privacy | Legal Terms & Conditions | © 2003 ULTRA-FLEX MOULDING INC.
adjustable molding, ultra flex moulding, ultra-flex moulding, american moulding , architectural moulding, base molding, base molding vinyl, base moulding, bead board chair rail, block corner crown molding, cabinet crown molding, case molding, casing moulding, ceiling moulding, chair crown molding rail, chair idea rail, chair moulding rail, chair panel rail, chair plastic rail, chair rail, chair rail molding, chair rail trim, chair rail wainscoting, company moulding, corner crown inside molding, corner crown molding, corner crown molding outside, crown custom molding, crown easiest install molding world, crown easy install molding, crown faux molding wood, crown flexible molding, crown flexible moulding, crown foam molding, crown idea molding, crown instalation molding, crown it molding yourself, crown jig molding, crown mdf molding, crown molding, crown molding polyurethane, crown molding trim, crown molding urethane, crown molding window, crown moulding, crown moulding plastic, crown moulding polyurethane, curved millwork, curved molding, curved moulding, custom millwork, custom molding, custom moulding, custom plastic injection molding, door molding, door moulding, exterior moulding, flex moulding, flexible molding, flexible molding rubber, flexible moulding, flexible trim, flex moulding, flex molding, radius arch moulding, radius arch trim, half round moulding, half round trim, half round arches, elliptical mouldings, elliptical trim, flexible trim wood, home molding plastic, injection molding company, injection moulding polyurethane, interior moulding, millwork moulding, molding, molding part plastic, molding plastic process, molding plastic supplier, molding plastic technique, moulding, moulding door, moulding pvc, moulding quarter round, moulding vinyl, moulding wholesale, plastic custom molding, plastic injection molding company, plastic molding, plastic molding company, plastic molding manufacturer, plastic molding technology, plastic moulding, polyurethane foam molding, polyurethane molding, polyurethane moulding, post top, remodeling supplies, round moulding, rubber custom molding, rubber molding, rubber moulding, trim molding, trim moulding, ultimate flex, ultra flex molding, ultra flex moulding, ultraflex molding, ultraflex moulding, ultraflexmoulding.com, urethane molding, window molding, window moulding, zflex

.



.