|
|
 |
Q - Do
I need to order the part pre-formed to match a curve or can
I order
it straight and form it on the job?
A - The best answer to this question is to
think of the piece of moulding as a heavy leather belt, a belt
that would wrap
around something easily. If you were to lay the belt flat on
the wall and attempt to pull the ends down to form an arch
it would buckle and wrinkle. The same is true with flexible
moulding. If you’re using it for base or chair rail applications
it can be purchased in its straight form. For curved radius
windows, crown and dormers it will need to be pre-formed by
Ultra-Flex Moulding.
Q - Is ULTIMATE FLEX® temperature sensitive?
A - ULTIMATE FLEX is a urethane based resin
with unique properties that allow it to be used in freezing
temperatures without pre-drilling
and has excellent performance in hot desert climates. ULTIMATE
FLEX will work and install easily when warmed up to 60 degrees
on the job.
Q - Can ULTIMATE FLEX be glued, nailed or cut like
wood moulding?
A - ULTIMATE FLEX has properties unique from
other flexible mouldings. The lighter weight material is easily
cut by using regular
woodworking tools such as a saw, hammer and finish nails or
nail guns (no pre-drilling required), construction adhesive
and wood putty for filling nail holes. Using a quality construction
adhesive before nailing is required, but no special glue is
required.
Q - Should I paint or stain it before installation?
A - You should paint or stain it after installation
or the finishing material may crack when moulding is flexed.
ULTIMATE FLEX is pre-primed so it’s easy to finish once
installation is complete.
Q - Can I machine it?
A - ULTIMATE FLEX has a machinable S4S when
you want to run your own custom mouldings that don’t
have to be pre-formed. It works great for short runs and is
not as abrasive as other
flexible mouldings. You should plan on using small incremental
cuts when machining for best results.
Q - Can I use ULTIMATE FLEX outside?
A - ULTIMATE FLEX being a polyurethane based
material, has excellent properties for exterior use. Brick
Mould, curved S4S and other
applications work well in hot or cold environments. It is very
durable but lightweight (similar to wood) for ease of installation.
Q - Is ULTIMATE FLEX cost-effective?
A - ULTIMATE FLEX is used in conjunction
with straight mouldings. You use ULTIMATE FLEX for the curved
part
of the application
and purchase the profile that matches your straight moulding.
ULTIMATE FLEX is much less expensive than using curved custom
wood millwork. Also, the fit and installation will be made
easier.
Q - Why should I use ULTIMATE FLEX for my curved millwork
applications?
A - ULTIMATE FLEX is the lightweight, easy-to-use
moulding that nails, cuts and acts like wood without splitting
or cracking. It is the most advanced flexible product on the
market and is used by professional craftsmen nationally for
their curved millwork applications. It is problem-free (over
five years track record) and is pre-primed for better paint
and stain adhesion and is sanded on the back for better fit
when installing.
Q - Why does ULTRA FLEX only offer ULTIMATE FLEX when
other companies offer two types of flexible mouldings?
A - ULTIMATE FLEX is an advanced polyurethane
based product. We see no reason to also offer a polyester based
product that doesn't measure up to the professional builder's
and architect's requirements. Lightweight ULTIMATE FLEX works
exceptionally well in all climates and locations without having
to be pre-drilled or being concerned about splitting or cracking.
Also drawing on our in-house technology, developed over the years, we have formulated a pollution-free system that enables a more efficient production environment.
Q - I have a custom moulding. Can you do custom jobs?
A - Even with over 5000 patterns custom jobs
are a major part of our business. Just send us a sample of
your part or a profile
drawing with dimensions so we can quote you custom pricing for
your requirements. |
 |
|
|
|
|
|
adjustable molding, ultra flex moulding, ultra-flex moulding, american moulding , architectural moulding, base molding, base molding vinyl, base moulding, bead board chair rail, block corner crown molding, cabinet crown molding, case molding, casing moulding, ceiling moulding, chair crown molding rail, chair idea rail, chair moulding rail, chair panel rail, chair plastic rail, chair rail, chair rail molding, chair rail trim, chair rail wainscoting, company moulding, corner crown inside molding, corner crown molding, corner crown molding outside, crown custom molding, crown easiest install molding world, crown easy install molding, crown faux molding wood, crown flexible molding, crown flexible moulding, crown foam molding, crown idea molding, crown instalation molding, crown it molding yourself, crown jig molding, crown mdf molding, crown molding, crown molding polyurethane, crown molding trim, crown molding urethane, crown molding window, crown moulding, crown moulding plastic, crown moulding polyurethane, curved millwork,
curved molding, curved moulding, custom millwork, custom molding, custom moulding, custom plastic injection molding, door molding, door moulding, exterior moulding, flex moulding, flexible molding, flexible molding rubber, flexible moulding, flexible trim, flex moulding, flex molding, radius arch moulding, radius arch trim, half round moulding, half round trim, half round arches, elliptical mouldings, elliptical trim, flexible trim wood, home molding plastic, injection molding company, injection moulding polyurethane, interior moulding, millwork moulding, molding, molding part plastic, molding plastic process, molding plastic supplier, molding plastic technique, moulding, moulding door, moulding pvc, moulding quarter round, moulding vinyl, moulding wholesale, plastic custom molding, plastic injection molding company, plastic molding, plastic molding company, plastic molding manufacturer, plastic molding technology, plastic moulding, polyurethane foam molding, polyurethane molding, polyurethane moulding, post top, remodeling supplies, round moulding, rubber custom molding,
rubber molding, rubber moulding, trim molding, trim moulding, ultimate flex, ultra flex molding, ultra flex moulding, ultraflex molding, ultraflex moulding, ultraflexmoulding.com, urethane molding, window molding, window moulding, zflex
|
|
|
 |
|
|
